chipnik
ProjectsBoardsHow it worksFor makers
  • English
  • Русский
PublishSign in
Menu
ProjectsBoardsHow it worksFor makersPublish a projectSign in
  • English
  • Русский

Projects

No soldering1For starters1
  • ESP32-C3 SuperMini×
  • Radio and mesh×
  • Needs Wi-Fi×
Reset
2 projects
NewestPopular
Board
AnyCheap Yellow Display1ESP32 DevKit2ESP32-S3 DevKit1ESP32-C3 SuperMini2Heltec WiFi LoRa 32 V31
What it does
AnySmart home4Radio and mesh2Drones and RC1Science and measurement1Other1
Build
No soldering1For starters1Up to 15 min1Needs Wi-Fi2Works without Wi-Fi1

LoRa APRS iGate

Ham radio gateway that hears LoRa APRS trackers nearby and forwards their positions and messages to aprs.fi.No solderingAbout 15 minESP32 DevKit and 2 more boards3 boardsBesides the board: 433 MHz antennaCan be built in an evening

TinyGS

Ground station that receives data from small satellites over LoRa and shares it with a worldwide network of stations.SolderingAbout 1 hESP32 DevKit and 2 more boards3 boardsBesides the board: LoRa module SX1278 (Ra-02) or SX1262 and 2 moreCan be built in an evening

Your project could be here

Point Chipnik at your GitHub repository and it picks up the releases. People get a Flash button for their board.

Publish a projectHow it works
chipnik
ProjectsBoardsHow it worksFor makersWe move your project for youHelp wantedRecommended gearGuidesFlash statisticsPublish a project
Early launchChipnik is made by olerastSupport and project reportsPrivacyTerms
  • English
  • Русский